Improper installation of a belt or chain valve timing

One of the causes sluggish acceleration and increased vehicle fuel economy may be incorrect installation of a belt or chain timing. Value labels on the pulleys when installing timing should be just the relevant manufacturer's instructions. Any other position markers only worsens the power characteristics of the motor. We often hear that the interchange of the belt on one or two teeth has led to a better driving car. But as a result of more rigorous inspections it appeared that some masters rather vaguely understand the difference between the installation of ignition timing. When moving the crank pulley mark and the camshaft together with the ignition timing varies roughly as the distributor for many engines installed on the same camshaft. In this case, was required to prove only the ignition timing marks and leave it alone. Violation of timing may be the cause of unstable operation of the engine at idle. Pay special attention should be approached to set timing on engines with balancer shafts. When installing the timing should be used by professional directories, which are now sold everywhere. Directory will save you from stupid and pointless searches the best combination of tags.