Care Used cars are getting ready to change the brakes

Outside the crisis means for the "zero" car few people have. Auto loans issued also not for everyone. What if the drive still necessary? You can get a used car, it will cost significantly less than new. Buy a vehicle with hands in general is not so difficult. You can place your ad in any free newspaper, the best in specialized. Then you will only receive phone calls. And you can see most other people's ads, and talk only about the copies already interested. Then it's simple. If necessary, take along a friend versed in the issue and go see the car. Will come to a compromise with the seller - are starting to execute documents. You can not - go see the next version. And so to the finish, that is to buy an iron horse. Unfortunately, used cars have one, but sometimes a significant disadvantage. They were already in operation, and for sure something will fail in the near future. For example, the braking system. If you have any suspicions, it is best to change both front and rear brake pads before they are broken. Especially if you are concerned about suspicious noises when stopping. It is quite possible to do yourself, without resorting to car service. Money we save, and spend time - only then you decide what is more expensive. Since we are talking about the time of financial crisis, let us assume that we have a lot of second and first - a little. To replace the front brake discs and hub bearings, it is necessary to prepare a series of spare parts and tools. Some of them include pliers, brace 19, the end switches 17 and 24, a flat screwdriver, clamp, torque wrench, hammer and brass ingots, as well as a jack stand and a car. Of spare parts needed brake discs, brake pads, inner and outer bearings, seals, hubs and pins high temperature grease, and preferably a new wheel nuts to replace them at the same time too. To change the rear brake pads and shoes will need the same set of tools, plus maybe another mount.